| Author |
Message |
Uniqua97
New member
Username: Uniqua97
Post Number: 22
Registered: 10-2006
| | Posted on Friday, July 31, 2009 - 01:23 pm: | 
|
Hi,
anyone tried to disassemble taking and viewing lenses of lubitel universal 166?
I could not figure out how to do.
Any ideas?
Regards, |
John_s
New member
Username: John_s
Post Number: 4
Registered: 07-2009
| | Posted on Saturday, August 01, 2009 - 09:33 am: |
|
I seem to remember there are four screws which retain the taking lens / shutter assembly from the rear inside the body. I found that if these were loosened, there was enough play to disengage / re-engage the gears and adjust the focussing - this seems to be a design feature. I did not have to do any more than this on mine, I guess if you remove the screws completely, the taking lens will come off. Hope this helps. |
T6nn
New member
Username: T6nn
Post Number: 2
Registered: 06-2009
| | Posted on Sunday, August 02, 2009 - 03:51 am: |
|
I think the viewing doublet simply unscrews from its geared barrel. Can't remember if there were any stopscrews... |
|
